Action模块详细说明

感知模块

PoseEstimation 6D位姿估计（只提供主线支持的箱子识别）
- 功能概述
  - 负责调用远程 6D 目标位姿估计服务，把 2D 检测框与 3D 位姿解析成 cv::Mat(4×4) 与 BBox(x1,y1,x2,y2)，供后续模块直接使用。
- 输入参数暂时无法在智元机器人文档外展示此内容
- 输出结果暂时无法在智元机器人文档外展示此内容
- 调用示例

C++

#include "src/action/6d_object_pose_estimation/pose_estimation.h"
void inference_pose(std::vector<cv::Mat>& mat_poses, std::vector<std::vector<double>>& boxes,aima::action::TargetType type){
  aima::action::PoseEstimation pose_action;
  aima::action::PoseParam &pose_param = pose_action.param;
  pose_param.camera_id                = "realsense_d415_head_front";
  pose_param.type = type;
  // pose_param.obj = "";
  Run(pose_action);
  // AIMRTE_INFO("pose_action.result.state:{}",pose_action.result.state);
  mat_poses = std::move(pose_action.result.mat_poses);
  boxes     = std::move(pose_action.result.boxes);
}

SendEnvObjectArrayInfo
- 功能概述
  - 发送环境障碍物，需要在规划之前发送，目前只能发送长方体障碍物
- 调用示例

C++

void send_env_objects(std::vector<cv::Mat> &T_objects_mc,std::vector<double> &box_size,std::string const &arm){
  set_action("PLANNING_MOVE");
  aima::action::perception_send_envobj::SendEnvObjectArrayInfo env_action;
  aima::action::perception_send_envobj::SendEnvObjectArrayInfoRequest &req = env_action.param;
  std::vector<aima::action::perception_send_envobj::param::EnvObjectInfo> Objects;
  for(size_t i = 0;i <T_objects_mc.size();i++){
    aima::action::perception_send_envobj::param::EnvObjectInfo obj;
    aima::action::perception_send_envobj::param::Vec3 dim;
    dim.x = box_size[0];
    dim.y = box_size[1];
    dim.z = box_size[2];

    obj.name = std::string("box") + std::to_string(i);
    obj.pose = endpose_to_reqse3_proto(RobotEndPose(T_objects_mc[i]));
    obj.type = aima::action::perception_send_envobj::param::EnvObjectInfo::GeometryType::BOX;
    obj.dims = dim;
    obj.parent_frame = "base_link";
    if(arm == "left"){
      obj.disable_collision_arm_name = 2;//忽略右臂
    }
    else if(arm == "right"){
      obj.disable_collision_arm_name = 1;//忽略左臂
    }
    else if(arm == "dual"){
      obj.disable_collision_arm_name = 0;//都不忽略
    }

    Objects.push_back(obj);
  }
  req.objects = Objects;
  Run(env_action);
  AIMRTE_INFO("env_action.result.state:{}",env_action.result.state);
  // aima::te::AssertTrue(env_action.result.state == aima::action:: mc::param::CommonState::Success);
}

TF模块

GetTransformAction
- 功能概述通过 RPC 服务查询任意两坐标系之间的实时 SE3 变换，并将结果封装成 4×4 齐次矩阵 (cv::Mat, CV_64F) 返回。矩阵格式： | R t | | 0 1 | 左上 3×3：旋转矩阵右上 3×1：平移向量
- 参数说明
- 有以下坐标系：rgbd_head（头部相机坐标系），base_link（机器人基坐标系），arm_base_link（手臂基坐标系），right_arm_link07（右手末端坐标系），left_arm_link07（左手末端坐标系）暂时无法在智元机器人文档外展示此内容
- 调用示例

C++

#include "./get_transform.h"

cv::Mat get_tf_transform(std::string const &source_frame, std::string const &target_frame)
{
  aima::action::GetTransformAction get_transform_action;
  auto &get_transform_param                   = get_transform_action.param;
  *get_transform_param.mutable_source_frame() = source_frame;
  *get_transform_param.mutable_target_frame() = target_frame;
  Run(get_transform_action);

  auto &ret                            = get_transform_action.result;
  aimdk::protocol::SE3Pose const &pose = ret.transform_stamped().transform();
  auto const &position                 = pose.position();
  auto const &orientation              = pose.orientation();

  // 初始化为单位矩阵
  cv::Mat position_mat = cv::Mat::eye(4, 4, CV_64F);

  // 设置平移分量
  position_mat.at<double>(0,3) = position.x();
  position_mat.at<double>(1,3) = position.y();
  position_mat.at<double>(2,3) = position.z();

  // 四元数转旋转矩阵
  Eigen::Quaterniond q(orientation.w(), orientation.x(), 
                      orientation.y(), orientation.z());
  Eigen::Matrix3d rotation_matrix = q.normalized().toRotationMatrix();

  // 转换到OpenCV并填充
  cv::Mat rotation_mat;
  cv::eigen2cv(rotation_matrix, rotation_mat);
  rotation_mat.copyTo(position_mat(cv::Rect(0, 0, 3, 3)));
  return position_mat;
}

运控模块MC

SetMcAction
- 功能概述
  - 设置MC规划模式，每次规划之前需要设置模式，主要模式为 "PLANNING_MOVE"
- 调用示例

C++

void set_action(std::string const& action_name) {
  aima::action::SetMcAction mc_actionl;
  aima::action::SetMcActionRequest &mc_action_req = mc_actionl.param;
  mc_action_req                                   = action_name;
  AIMRTE_INFO("set action: {}", action_name);
  Run(mc_actionl);
  bool result = mc_actionl.result;
  if (!result) {
    AIMRTE_ERROR("set action {} failed", action_name);
  } else {
    AIMRTE_INFO("set action {} success", action_name);
  }
  AIMRTE_INFO("mc_actionl.result.state:{}",mc_actionl.result);
  // aima::te::AssertTrue(mc_actionl.result.state == aima::action:: mc::param::CommonState::Success);
}

PlanningMove
- 功能概述一次性规划左臂 / 右臂 / 双臂的 SE3 目标位姿，支持是否带腰部，完成轨迹规划并执行。内部通过 PlanningMove RPC 与运动控制服务通信
- 输入参数暂时无法在智元机器人文档外展示此内容
- 调用示例(各自运动）

C++

#include "src/action/mc/mc.h"

bool planning_move(std::string const &group, std::vector<cv::Mat> const &matrix_pose, std::vector<double> const &ref_joint_positions, bool use_waist)
{
  set_action("PLANNING_MOVE");
  aima::action::PlanningMove planning_move_action;
  auto &planning_move_param = planning_move_action.param;
  if (group == "left") {
      if (use_waist) {
        planning_move_param.group = aima::action::mc::param::Group::LeftArmWaist;
      } else {
        planning_move_param.group = aima::action::mc::param::Group::LeftArm;
      }
    } 
  else if(group == "right") {
      if (use_waist) {
        planning_move_param.group = aima::action::mc::param::Group::RightArmWaist;
      } else {
        planning_move_param.group = aima::action::mc::param::Group::RightArm;
      }
    }
  else if(group == "dual"){
    if (use_waist) {
      planning_move_param.group = aima::action::mc::param::Group::DualArmWaist;
    } else {
      planning_move_param.group = aima::action::mc::param::Group::DualArm;
    }

  }
  
  //AIMRTE_INFO("SE3Pose pose :{},{},{},{},{},{},{}",pose.position.x,pose.position.y,pose.position.z,pose.orientation->w,pose.orientation->x,pose.orientation->y,pose.orientation->z);
  aima::action::mc::param::planning::PlanningTarget pt;
  pt.type                                       = aima::action::mc::param::planning::PlanningTarget::Type::SE3;
  if(group == "right"){
    pt.right                                      = endpose_to_reqse3(RobotEndPose(matrix_pose[1]));
  }
  else if(group == "left"){
    pt.left                                      = endpose_to_reqse3(RobotEndPose(matrix_pose[0]));
  }
  else if(group == "dual"){
    pt.right                                      = endpose_to_reqse3(RobotEndPose(matrix_pose[1]));
    pt.left                                      = endpose_to_reqse3(RobotEndPose(matrix_pose[0]));
  }
  planning_move_param.targets                   = {pt};
  planning_move_param.reference.joint_positions = ref_joint_positions;
  Run(planning_move_action);
  AIMRTE_INFO("planning_move_action.result.state:{}",planning_move_action.result.state);
  if(planning_move_action.result.state == aima::action:: mc::param::CommonState::Success){
    return true;
  }
  if(planning_move_action.result.state == aima::action:: mc::param::CommonState::Failure){
    return false;

  }
  return true;
  // aima::te::AssertTrue(planning_move_action.result.state == aima::action:: mc::param::CommonState::Success);
}

调用示例(闭链运动）

C++

#include "src/action/mc/mc.h"

bool planning_closure_move(RobotEndPose const& current_pose, RobotEndPose const& target_pose, std::vector<double> const& ref_joint_positions, bool use_waist) {
  set_action("PLANNING_MOVE");
  palnnging_grab_obj(current_pose,ref_joint_positions);
  aima::action::PlanningMove planning_move_action;

  auto &planning_move_param = planning_move_action.param;
  if (use_waist) {
    planning_move_param.group = aima::action::mc::param::Group::DualArmWaist;
  } else {
    planning_move_param.group = aima::action::mc::param::Group::DualArm;
  }

  planning_move_param.obj_info.pose = endpose_to_reqse3(target_pose);

  planning_move_param.obj_info.type = aima::action::mc::param::planning::PlanningMoveObjectInfo::GeometryType::BOX;

  aima::action::mc::param::planning::PlanningTarget pt;
  pt.type                                       = aima::action::mc::param::planning::PlanningTarget::Type::SE3;
  pt.left                                      = endpose_to_reqse3(target_pose);
  planning_move_param.targets                   = {pt};

  planning_move_param.obj_info.name = "box";

  planning_move_param.obj_info.parent_frame = "box";
  planning_move_param.mode = aima::action::mc::param::planning::PlanningMode::Closure;
  planning_move_param.reference.joint_positions = ref_joint_positions;

  Run(planning_move_action);
  AIMRTE_INFO("planning_move_action.result.state:{}",planning_move_action.result.state);
  if(planning_move_action.result.state == aima::action:: mc::param::CommonState::Success){
    return true;
  }
  if(planning_move_action.result.state == aima::action:: mc::param::CommonState::Failure){
    return false;
  }
}

LinearMove
- 功能概述在笛卡尔空间中让指定机械臂（左 / 右 / 双臂）沿当前末端 TCP 做线性平移；内部通过 LinearMove RPC 完成轨迹规划与执行。
  - 输入是相对坐标系的 xyz 增量（m）。
  - 不旋转，仅平移。
  - 支持单臂或双臂同步。
- 调用示例

C++

#include "src/action/mc/mc.h"

bool liner_move(std::string const &arm_name, std::vector<double> const &move_distance_left, std::vector<double> const &move_distance_right)
{
  set_action("PLANNING_MOVE");
  if ((move_distance_left.size() == 0 && move_distance_right.size() == 0) || (move_distance_left.size() != 3 && move_distance_right.size() != 3)) {
    AIMRTE_ERROR("move_distance_left and move_distance_right are empty");
    return;
  }
  cv::Mat target_end_l = get_tf_transform("left_arm_link07", "base_link");
  cv::Mat target_end_r = get_tf_transform("right_arm_link07", "base_link");
  for (int i = 0; i < 3; ++i) {
    if (move_distance_left.size() != 0) {
      target_end_l.at<double>(i, 3) += move_distance_left[i];
    }
    if (move_distance_right.size() != 0) {
      target_end_r.at<double>(i, 3) += move_distance_right[i];
    }
  }
  PrintCVMat(target_end_l,"target_end_l");
  PrintCVMat(target_end_r,"target_end_r"); 

  AIMRTE_INFO("DEBUG 1");
  aima::action::LinearMove mc_action;
  aima::action::mc::param::planning::LinearMoveTaskRequest &linear_move_param = mc_action.param;
  aima::action::mc::param::planning::PlanningTarget pt;
  pt.type    = aima::action::mc::param::planning::PlanningTarget::Type::SE3;
  if (arm_name == "left") {
    linear_move_param.group           = aima::action::mc::param::Group::LeftArm;
    pt.left = endpose_to_reqse3(RobotEndPose(target_end_l));
  } else if (arm_name == "right") {
    linear_move_param.group            = aima::action::mc::param::Group::RightArm;
    pt.right = endpose_to_reqse3(RobotEndPose(target_end_r));
  } else if (arm_name == "dual") {
    linear_move_param.group            = aima::action::mc::param::Group::DualArm;
    pt.left  = endpose_to_reqse3(RobotEndPose(target_end_l));
    pt.right = endpose_to_reqse3(RobotEndPose(target_end_r));
  } else {
    AIMRTE_ERROR("arm_name is not valid");
    return;
  }
  linear_move_param.targets                   = {pt};
  Run(mc_action);
  if(mc_action.result.state() != 1){
    AIMRTE_ERROR("linearMove failed, state:{}", linear_action.result.state());
    return false;
  }else{
    AIMRTE_INFO("linearMove success, state:{}", linear_action.result.state());
    return true;
  }
}

GetJointParamAction
- 功能概述
  - 获取各关节参数
- 调用示例

C++

std::unordered_map<std::string, double> get_joint_param(){
  set_action("PLANNING_MOVE");
  std::unordered_map<std::string, double> joint_param;
  aima::action::GetJointParamAction get_joint_state_action;
  auto &get_joint_state_param = get_joint_state_action.param;
  Run(get_joint_state_action);
  //AIMRTE_INFO("get_joint_state_action.result.state:{}",get_joint_state_action.result.state);
  //aima::te::AssertTrue(get_joint_state_action.result.state == aima::action:: mc::param::CommonState::Success);
  auto &ret = get_joint_state_action.result;
  for (auto const &joint : ret.joints()) {
    joint_param[joint.name()] = joint.position();
    AIMRTE_DEBUG("joint name: {}, position: {}", joint.name(), joint.position());
  }
  return joint_param;
}
- GetJointAngle
  - 功能概述
    - 获取各关节关节角度
  - 调用示例
std::unordered_map<std::string, double> get_joint_angle() {
  set_action("PLANNING_MOVE");
  // std::unordered_map<std::string, double> joint_angle;
  aima::action::GetJointAngle get_joint_angle_action;
  Run(get_joint_angle_action);
  // AIMRTE_INFO("get_joint_angle_action.result.state:{}",get_joint_angle_action.result.state);
  // aima::te::AssertTrue(get_joint_angle_action.result.state == aima::action:: mc::param::CommonState::Success);
  auto &ret = get_joint_angle_action.result;
  for (auto const&[name, angle] : ret.joint_angles) {
    // joint_angle[joint.name()] = joint.position();
    AIMRTE_INFO("joint name: {}, position: {}", name, angle);
  }
  return ret.joint_angles;
}

JointControl
- 功能概述
  - 设置单个关节角度并运动
- 调用示例

C++

bool move_head_pitch(double angle)
{
  set_action("PLANNING_MOVE");
  using namespace aimdk::protocol;
  aima::action::JointControl mc_action_head;
  JointControlRequest &req_head = mc_action_head.param;
  req_head.set_group(JointControlRequest::HEAD);
  // move head pitch
  auto cmd = req_head.add_cmds();
  cmd->set_name("idx11_head_joint");
  cmd->set_mode(JointControlRequest::Control::Mode::
                  JointControlRequest_Control_Mode_ABSOLUTE);
  cmd->set_angle(angle);
  Run(mc_action_head);
  if (mc_action_head.result.state() != 1) {
    AIMRTE_ERROR("move_head_pitch failed, state:{}", mc_action_head.result.state());
    return false;
  } else {
    AIMRTE_INFO("move_head_pitch success, state:{}", mc_action_head.result.state());
    return true;
  }
}

MovjControl
- 功能概述
  - 各关节movJ运动
- 调用示例

C++

bool move_arm_joints(std::vector<double> const& joint_angles){
  set_action("PLANNING_MOVE");
  aima::action::MovjControl mc_action_joint;
  aimdk::protocol::MovJRequest &req = mc_action_joint.param;
  req.set_group(::aimdk::protocol::McPlanningGroup::McPlanningGroup_DUAL_ARM);
  for(size_t i=0;i<joint_angles.size();i++){
    req.add_angles(joint_angles[i]);
  }
  Run(mc_action_joint);
  AIMRTE_INFO("mc_action_joint.result.state:{}",mc_action_joint.result.state());
  if (mc_action_joint.result.state() != 1) {
    AIMRTE_ERROR("move_head_pitch failed, state:{}", mc_action_head.result.state());
    return false;
  } else {
    AIMRTE_INFO("move_head_pitch success, state:{}", mc_action_head.result.state());
    return true;
}

ClawControl
- 功能概述
  - 控制夹爪闭合张开
- 调用示例

C++

void close_gripper(std::string const &arm_name, uint32_t force, uint32_t pos,uint32_t vel)
{

  aima::action::ClawControl claw_control;
  aima::action::mc::param::ClawCommand &claw_command = claw_control.param;
  claw_command.hasLeft = false;
  claw_command.hasRight = false;
  if (arm_name == "left") {
    claw_command.left.mode  = aima::action::mc::param::SingleClawCommand::Mode::Close;
    claw_command.left.force = force;
    claw_command.left.pos   = pos;
    claw_command.left.vel = vel;
    claw_command.hasLeft = true;

  } else if(arm_name == "right") {
    claw_command.right.mode  = aima::action::mc::param::SingleClawCommand::Mode::Close;
    claw_command.right.force = force;
    claw_command.right.pos   = pos;
    claw_command.right.vel = vel;
    claw_command.hasRight = true;
  } else if(arm_name == "dual"){
    claw_command.left.mode  = aima::action::mc::param::SingleClawCommand::Mode::Close;
    claw_command.left.force = force;
    claw_command.left.pos   = pos;
    claw_command.left.vel = vel;
    claw_command.hasLeft = true;

    claw_command.right.mode  = aima::action::mc::param::SingleClawCommand::Mode::Close;
    claw_command.right.force = force;
    claw_command.right.pos   = pos;
    claw_command.right.vel = vel;
    claw_command.hasRight = true;
  }

  Run(claw_control);
  AIMRTE_INFO("claw_control.result.state:{}",claw_control.result);
  claw_command.hasLeft = false;
  claw_command.hasRight = false;
  // aima::te::AssertTrue(claw_control.result.state == aima::action:: mc::param::CommonState::Success);
}

aima::action::ClawControl open_gripper_action(double open_width, uint32_t force)
{
  aima::action::ClawControl claw_control;
  // force =100; default
  // pos = open_width ; default 90
  
  auto &claw_command       = claw_control.param;
  claw_command.left.mode  = aima::action::mc::param::SingleClawCommand::Mode::Open;
  claw_command.left.force = force;
  claw_command.left.pos   = open_width;
  claw_command.hasLeft = true;

  claw_command.right.mode  = aima::action::mc::param::SingleClawCommand::Mode::Open;
  claw_command.right.force = force;
  claw_command.right.pos   = open_width;
  claw_command.hasRight = true;
  Run(claw_control);
  AIMRTE_INFO("claw_control.result.state:{}",claw_control.result.state);
  claw_control.param.hasLeft = false;
  claw_control.param.hasRight = false;
  // aima::te::AssertTrue(claw_control.result.state == aima::action:: mc::param::CommonState::Success);
}

语音模块

PlayVoiceService
- 功能概述
  - 播放语音
- 调用示例

C++

#include <src/action/interaction/play_voice.h>

void send_voice(std::string const &text){
  aima::action::PlayVoiceService voice_action;
  auto &voice_param       = voice_action.param;
  voice_param.task.task_name = "interaction_task";
  voice_param.task.task_type = aima::action::PlayVoice::param::InteractionTaskType::InteractionTaskType_Pass;
  aima::action::PlayVoice::param::InteractionInfo task_info ;
  task_info.text = text;
  
  task_info.motion_name = "10001";
  task_info.face_expression = "10005";
  task_info.voice_type = "";
  task_info.emotion = "";
  voice_param.task.interaction_list.push_back(task_info);
  AIMRTE_INFO("run voice_action:{}",text);

  Run(voice_action);

}

导航模块pnc

PlanningNaviToGoal
- 功能概述
  - 下发给定目标点ID的规划导航任务
- 调用示例

C++

#include <src/action/pnc/pnc.h> 

aima::action::PlanningNaviToGoal planning_navi_to_goal;
planning_navi_to_goal.param.target.map_id      = user_cfg.map_id.value; //设置地图
planning_navi_to_goal.param.target.ackerman_mode = false;
pose_navi_to_goal.param.is_avoid               = false;
planning_navi_to_goal.param.target.target_id = user_cfg.place_point_1.value;//设定目标点
Run(planning_navi_to_goal);
aima::te::AssertTrue(planning_navi_to_goal.result.is_success);
- PlanningNaviToPose2D
  - 功能概述
    - 下发给定目标点位姿的规划导航
  - 调用示例
aima::action::PoseNaviToGoal pose_navi_to_goal;
pose_navi_to_goal.param.map_id = user_cfg.map_id.value;
pose_navi_to_goal.param.ackerman_mode = false;
pose_navi_to_goal.param.is_avoid               = false;
pose_navi_to_goal.param.x     = 0;  //地图点位
pose_navi_to_goal.param.y     = 0;
pose_navi_to_goal.param.angle = 0;
Run(pose_navi_to_goal);
aima::te::AssertTrue(pose_navi_to_goal.result.is_success);

MoveForward
- 功能概述
  - 下发直线平移任务
- 调用示例

C++

aima::action::MoveForward move_forward;
move_forward.param.map_id                 = user_cfg.map_id.value;
move_forward.param.distance = 0.05;
move_forward.param.angle = 0;
Run(move_forward);
aima::te::AssertTrue(move_forward.result.is_success);

DirectNaviToRelative
- 功能概述
  - 下发给定相对目标点位姿的直接移动任务,一边平移一边旋转，仅适用于目标点与机器人朝向偏差较小的任务，否则可能导致到点偏差较大
- 调用示例

C++

aima::action::DirectNaviToRelative direct_navi_to_relative;
direct_navi_to_relative_goal.param.map_id = user_cfg.map_id.value;
direct_navi_to_relative.param.map_id = user_cfg.map_id.value;
direct_navi_to_relative.param.pose.position.x     = 0;
direct_navi_to_relative.param.pose.position.y    = 0;
direct_navi_to_relative.param.pose.angle  = -0.26;
Run(direct_navi_to_relative);
aima::te::AssertTrue(direct_navi_to_relative.result.is_success);

LinearNaviToGoal
- 功能概述
  - 下发给定目标点ID的直线导航任务，先执行原地旋转，再执行直线移动
- 调用示例

C++

aima::action::PlanningNaviToGoal linear_move_to_goal;
linear_move_to_goal.param.target.map_id      = user_cfg.map_id.value; //设置地图
linear_move_to_goal.param.target.target_id = user_cfg.place_point_1.value;//设定目标点
Run(linear_move_to_goal);
aima::te::AssertTrue(linear_move_to_goal.result.is_success);

SpinTurn
- 功能概述
  - 下发原地旋转任务
- 调用示例

C++

aima::action::SpinTurn spin;
spin.param.angle = 0;
Run(spin);
aima::te::AssertTrue(spin.result.is_success);